Infinera trial for Telstra InfraCo’s intercity fiber project delivered 61.3 Tbps between Melbourne and Sydney, Australia
Infinera has completed a simulated intercity network trial for Telstra InfraCo’s intercity fiber project in Australia. The trial delivered 61.3 Tbps of unregenerated data transmission capacity on a fiber pair over the equivalent of 1,240 route km between Melbourne and Sydney, Australia. The network trial was implemented using Infinera’s 800G-capable ICE6 coherent solution [1.] and Corning Incorporated’s SMF-28® ULL fiber with advanced bend, demonstrating the high-performance capability of the express network, which is part of the intercity fiber network Telstra InfraCo is building across Australia.
Note 1. The sixth-generation Infinite Capacity Engine (ICE6), from Infinera’s Advanced Coherent Optical Engines and Subsystems, is a 1.6 Tb/s optical engine that delivers two independently programmable wavelengths at up to 800 Gb/s each. Utilizing a 7-nm CMOS process node DSP and advanced PIC technology, ICE6 leverages ultra-high baud rates, high modem SNR, and innovative features to break performance and spectral efficiency barriers, including 800G single-wavelength performance over 1000+ km in a commercial network. ICE6 is also beating optical transmission expectations at lower rates, including 600 Gb/s and 400 Gb/s per wavelength.
Image Credit: Infinera
……………………………………………………………………………………………………………………………………………………………………………………………………………………………………………….
The trial was performed with real-world configurations, including 1,240 kilometers of ultra-low-loss fiber simulating one of Telstra InfraCo’s planned express Melbourne-Sydney routes. Infinera performed an in-service, non-traffic-impacting upgrade from C-band to combined C-band plus L-band as part of the capacity expansion process. With Infinera’s ICE6 and Corning’s optical fiber, Telstra InfraCo achieved 61.3 Tbps total capacity with 6.2 milliseconds latency across the combined C-band and L-band, with wavelengths up to 700 Gbps.
Telstra InfraCo’s express network is designed to be a high-performance national network for customers who need reliable, ultra-high bandwidth between capital cities and international submarine cable landing stations. For hyperscalers, global cloud providers, content companies, and governments, this means access to scalable high capacity and more direct routes, with optional route redundancy.
“Based on these results, Telstra InfraCo’s express network and overall intercity fiber build will lead the world in scale, low latency, and high data transmission performance rate,” said Kathryn Jones, Fiber Executive at Telstra InfraCo. “The simulation exceeds our expectations, offering almost seven times today’s typical capacity of 8.8 Tbps per fibre pair and validates our selection of Corning’s SMF-28 ULL fiber in the cable design. This will enable Telstra to develop market-leading solutions for our customers today and for years to come – a key element of Telstra’s ambitious T25 strategy and transformation goals.”
“To meet the rigorous demands of a vast network over Australia’s unique terrain, Telstra InfraCo needed fiber infrastructure with advanced bend capability and minimal signal loss to deliver ultra-high cable capacity. That’s why they turned to Corning,” said Sharon Bois, Division Vice President, Product Line and Marketing, Corning Optical Fiber and Cable. “Our SMF-28® ULL fiber with advanced bend is designed to meet exactly those needs.”
“Infinera’s 800G-capable ICE6 solution demonstrated industry-leading performance, maximizing fiber capacity and reach on Telstra InfraCo’s express network configuration,” said Nick Walden, Senior Vice President of Worldwide Sales at Infinera. “This achievement underscores the enhanced performance Infinera’s technology can bring to meet Telstra InfraCo’s express network requirements for bandwidth today and into the future.”
Media Contact:
Anna Vue
Tel. +1 (916) 595-8157
[email protected]
Referencs:
Fiber Build-Out Boom Update: GTT & Ziply Fiber, Infinera in Louisiana, Bluebird Network in Illinois